Wide Ribbed Rubber Matting
Wide ribbed anti-slip matting in grade N12, in 3 mm and 6 mm on 1220 mm rolls. Broad flutes give grip and let water drain away, for entrances and busy floors.
- Grade: N12
- Material: Natural/SBR rubber blend
- Surface: Broad fluted (wide ribbed)
- Roll length: 10 m
6 mm × 1220 mm × 6 m · per roll
Dashed sizes are not made in that combination. See every size and price or ask for a custom size.
In stock. Usually dispatched same day if ordered before 12:00pm and in stock.
Delivery calculated at checkout.
- Same-day dispatch before 12pm on stock orders
- Custom sizes on request
- Expert replies within 3 hours
- Family-run since 1996
Need a different size, or not sure which rubber?
Call 01925 825552 (Monday to Friday, 8.30am to 5pm) or ask our experts. Expert replies within 3 hours.
Technical data
Specifications
| Grade | N12 |
|---|---|
| Material | Natural/SBR rubber blend |
| Surface | Broad fluted (wide ribbed) |
| Hardness | 70 degrees Shore A |
| Specific gravity | 1.5 g/cm3 |
| Tensile strength | 3.5 MPa |
| Elongation at break | 300% |
| Temperature range | minus 20 C to plus 70 C |
| Roll width | 1220 mm |
| Roll length | 10 m |
| Cut lengths | 1 to 10 metres, cut as one continuous piece |
| Thicknesses available | 3 mm, 6 mm |
| Wides available | 1220 mm |
| Lengths available | 1 m, 2 m, 3 m, 4 m, 5 m, 6 m, 7 m, 8 m, 9 m, 10m (full roll) |
| Selected size | Thickness 6 mm, Wide 1220 mm, Length 6 m |
Prices are shown excluding VAT at 20%, with the price including VAT beneath. Every size is priced per roll of 10 metres.
Certificates of conformity on request. Need a width, length or material we don't list? Custom sizes are available on request.
Ask a technical questionCompare every size
Sizes and prices
| Thickness / Wide / Length | Price |
|---|---|
| 3 mm × 1220 mm × 1 m | £11.88£14.26 inc |
| 3 mm × 1220 mm × 2 m | £23.76£28.51 inc |
| 3 mm × 1220 mm × 3 m | £35.64£42.77 inc |
| 3 mm × 1220 mm × 4 m | £47.52£57.02 inc |
| 3 mm × 1220 mm × 5 m | £59.40£71.28 inc |
| 3 mm × 1220 mm × 6 m | £71.28£85.54 inc |
| 3 mm × 1220 mm × 7 m | £83.16£99.79 inc |
| 3 mm × 1220 mm × 8 m | £95.04£114.05 inc |
| 3 mm × 1220 mm × 9 m | £106.92£128.30 inc |
| 3 mm × 1220 mm × 10m (full roll) | £108.00£129.60 inc |
| 6 mm × 1220 mm × 1 m | £23.98£28.78 inc |
| 6 mm × 1220 mm × 2 m | £47.96£57.55 inc |
| 6 mm × 1220 mm × 3 m | £71.94£86.33 inc |
| 6 mm × 1220 mm × 4 m | £95.92£115.10 inc |
| 6 mm × 1220 mm × 5 m | £119.90£143.88 inc |
| 6 mm × 1220 mm × 6 m | £143.88£172.66 inc |
| 6 mm × 1220 mm × 7 m | £167.86£201.43 inc |
| 6 mm × 1220 mm × 8 m | £191.84£230.21 inc |
| 6 mm × 1220 mm × 9 m | £215.82£258.98 inc |
| 6 mm × 1220 mm × 10m (full roll) | £218.00£261.60 inc |
About Wide Ribbed Rubber Matting
Our Wide Ribbed Rubber Matting (Grade N12) is a robust and durable flooring option ideal for high-traffic industrial and commercial environments. Its broad fluted surface design offers enhanced grip and excellent drainage, making it a preferred choice for walkways, entrances, and factory floors. Manufactured from premium NR/SBR rubber blend for long-lasting performance.
Custom Sizing and Options
This matting is available in 3mm and 6mm thicknesses, both supplied in 1220mm wide rolls. Supplied as a 10 metre roll, or cut to any whole number of metres up to 10. Cut lengths are one continuous piece and carry a 10% uplift on the per metre price. If you require a larger quantity or custom sizing, please get in touch with the team.
Technical Specifications
- Grade: N12
- Hardness: 70° Shore A
- Specific Gravity: 1.5 g/cm³
- Tensile Strength: 3.5 MPa
- Elongation at Break: 300%
- Temperature Range: -20°C to +70°C
- Material: Natural/SBR Rubber Blend
- Surface: Broad Fluted (Wide Ribbed)
Common Applications
- Heavy-duty walkways and access areas
- Warehouse and loading bay flooring
- Industrial safety flooring
- Retail and public entrances
Order Your Wide Ribbed Rubber Matting
Our wide ribbed matting is available in standard roll sizes and ready to ship with a fixed delivery rate of £55. Select your preferred thickness and add to cart, or contact us for large or bespoke orders.
Get the right strip first time
Choosing and measuring
How to measure
Matting is sold by the 10 metre roll, or cut from one in whole metres. Measure the floor, not the roll.
- 1Measure the length of floor you need to cover, in metres.
- 2Check the roll width covers it: wider floors take two runs side by side.
- 3Order that many whole metres, or a full roll if you need 10 m or more.
- 4Allow a little extra if you are trimming around machinery or doorways.
Which pattern do I need?
| You need | Best pattern | Why |
|---|---|---|
| Grip on a walkway or at a workstation | Fine ribbed (N11) | A fine fluted profile for underfoot traction |
| Grip and drainage in a busy entrance | Wide ribbed (N12) | Broad flutes grip and let water run off |
| Heavy-duty grip in wet or oily areas | 5 bar checkerplate (N28) | A raised checkerplate surface for maximum grip |
| Grip that copes with oil underfoot | Rhomboid checkerplate (N27) | A raised rhomboid pattern that grips in wet or oily conditions |
| A hard-wearing general purpose floor | Circular stud (N13) | The classic coin pattern, reliable in high traffic |
All five are the same NR/SBR rubber blend. The pattern decides the grip and the look; the thickness decides how much wear it takes.
Applications
- Entrances and doorways
- High-traffic walkways
- Factory floors
- Areas that need drainage
What our customers say
Trusted by businesses across the UK.
“Just wanted to say thanks for the excellent service you and your team have provided with this order, it is very much appreciated. Please thank all who made it possible and I look forward to giving you future orders and of course recommending your company to others. Thanks again.”
Catercool NW Ltd
Verified customer
Delivery and returns
Dispatch
Usually dispatched same day if ordered before 12:00pm and in stock.
Delivery
Delivery calculated at checkout. UK mainland delivery. For Highlands, Islands, Northern Ireland or export, contact us for a quote. Please report any delivery issue within 2 working days of receiving your order.
Delivery policyReturns
Standard stock items can be returned within 14 days of delivery in their original condition. Products cut or made to your specification cannot be returned unless faulty.
Returns policyFrequently asked questions
How is matting sold?
As a 10 metre roll, or cut from a roll in whole metres from 1 to 10. A cut length is supplied as one continuous piece and carries a 10% uplift on the per metre price.
Why does a cut length cost more per metre?
Cutting a length off a roll takes labour and leaves a part roll behind, so cut lengths carry a 10% uplift on the per metre price. If you want a full 10 metres uncut, buy the roll instead: it works out cheaper.
Can I order more than 10 metres?
Ten metres is the longest length we cut. For more than that, order full rolls, or call us and we will quote a longer continuous run.
How thick should it be?
3 mm suits general walkways and workstations. 6 mm takes heavier traffic and lasts longer underfoot, where it is offered.
What is it made from?
A natural rubber and SBR blend, 70 degrees Shore A on most grades, rated minus 20 to plus 70 degrees C.
Is it anti-slip?
Yes. Every pattern here is a raised or fluted anti-slip profile; which one suits you depends on whether the floor is dry, wet or oily.
How quickly will it be dispatched?
Usually dispatched same day if ordered before 12:00pm and in stock. Cut lengths are made up before dispatch.
Do prices include VAT?
Prices are shown excluding VAT, with the price including VAT beneath. VAT is added at checkout.
Expert replies within 3 hours
Ask an expert or request a custom size
Not sure which size or material, need a width or length we don't list, or a certificate of conformity? Our specialists will help.
- 01925 825552
- info@crystalrubber.co.uk
- Monday to Friday, 8.30am to 5pm · Family-run since 1996
