Product Range:
CR120IS - Black Economy 1 ply insertion NR / SBR Rubber 65° shore
An ‘economy’ grade commercial quality Natural Rubber and Styrene Butadiene rubber blend with Polyester insertion.
Due to the nature and economy of manufacture [an amount of RECLAIMED materials are blended with base polymer and fillers] minor surface deformations and blemishes may occur and materials may be more odorous than normal.
| Material Profile | See below |
| Thickness | 1.5mm to 10mm |
| Sheet Size | 1.4m wide in 5, 10 & 20m rolls |
| Finish | Smooth |
| Cutting | Standard press-tools |
Other grades, colours and finishes are available (subject to minimum batch quantities)
Search Results:
| Material | NR/SBR |
| Application | General Purpose |
| Store Hardness +/- 5º | 65 |
| Thickness | 1.5mm, 2mm, 3mm, 4mm, 5mm, 6mm, 8mm, 10mm |
| Temp. Range | -20°C to +70°C |
| Colour | Black |
| Insertion Req | Yes |
| Cloth/Plate | Plate / Plate |
| Resistant To | N/A |
Technical Data:
| Stock Roll Sizes [mm x mm x m] |
Surface Finish | Weight [kg/M²] | Specifications Compound | Values [typical] |
| 1.5mm x 1400mm x 10m | SS | 2.40 | Colour | Black |
| 3mm x 1400mm x 10m | SS | 4.80 | Compound | SBR |
| 4mm x 1400mm x 10m | SS | 6.40 | Density [specific gravity] | 1.6 |
| 5mm x 1400mm x 10m | SS | 8.00 | Hardness [degrees shore A] | 65° ± 5° |
| 6mm x 1400mm x 10m | SS | 6.40 | Tensile strength [Mpa] | 2.5 |
| 10mm x 1400mm x 10m | SS | 8.00 | Elongation at break | 130% |
| Minimum temperature | -20°C | |||
| Maximum temperature | +70°C | |||
| Compression set (70°C for 22 hours) % | 60 |
