Novus 29
Novus 29 is a good quality compressed non-asbestos sheet material, based on aramid fibre with a high quality Neoprene binder system.
Service
Novus 29 is designed for use in Freon type refrigerant service and high aniline-point oils, also in ammonia gas, fuels, mild acids, mild alkalis, water and silicone esters.
Availability
| Standard sheet sizes (m): | 2.0 x 2.0 2.0 x 1.5 2.0 x 1.0 1.5 x 1.5 1.5 x 1.0 |
| Thickness range (mm): | 0.5 to 3.0 |
| Standard roll sizes (m): | 6.0 x 2.0 |
Physical properties
| Thickness | 1.5mm | |
| Density | 1.85g/cc | |
| Tensile Strength | ASTM F152 | 10MPa |
| Compression | ASTM F36 | 7 to 17% |
| Recovery | ASTM F36 | >50% min |
| Residual Stress | BS 7531 (300°C) DIN 52913 |
27MPa |
| Gas Leakage | BS 7531 | <1.0cc/min |
| ASTM Oil 1 | Thickness Increase | 0-10% |
| IRM 903 Oil | Thickness Increase | 0-10% |
| ASTM Fuel B | Thickness Increase | 0-10% |
Novus 29 Pressure/Temperature Limits
1. Suitable subject to chemical compatibility.
2. Suitable in some cases but check your application requirements with Flexitallic.
3. Contact the Technical Team for applicatis on with higher temperatures and pressures. Applicable to 1.5mm and below.
The operating temperature of non-asbestos sheet material is related to the thickness of materials selected. Thinner materials give better temperature and pressure properties.
