PTFE Coated Tapes
Crystal-Pak 3 Stic
Smooth, non-stick PTFE coated tape fabricated from glass fibre.
Fabric thickness 0.06 mm, coated thickness (without adhesive/liner) 0.076 mm; weight without adhesive 150 g/m2; breaking strength (warp) 120 N/cm, (weft) 90 N/cm.
Click here for Specifications (pdf)
Crystal-Pak 5 Stic
Smooth, non-stick PTFE coated tape fabricated from glass fibre.
Fabric thickness 0.09 mm, coated thickness (without adhesive/liner) 0.109 mm; weight without adhesive 230 g/m2; breaking strength (warp) 160 N/cm, (weft) 120 N/cm.
Click here for Specifications (pdf)
Crystal-Pak 6 Stic
Smooth, non-stick PTFE coated tape fabricated from glass fibre.
Fabric thickness 0.09 mm, coated thickness (without adhesive/liner) 0.118 mm; weight without adhesive 260 g/m2; breaking strength (warp) 150 N/cm, (weft) 120 N/cm.
Click here for Specifications (pdf)
Crystal-Pak 10 Stic
Smooth, non-stick PTFE coated tape fabricated from glass fibre.
Fabric thickness 0.18 mm, coated thickness (without adhesive/liner) 0.209 mm; weight without adhesive 440 g/m2; breaking strength (warp) 250 N/cm, (weft) 180 N/cm.
Click here for Specifications (pdf)
Crystal-Pak 14 Stic
Smooth, non-stick PTFE coated tape fabricated from glass fibre.
Fabric thickness 0.25 mm, coated thickness (without adhesive/liner) 0.276 mm; weight without adhesive 560 g/m2; breaking strength (warp) 400 N/cm, (weft) 300 N/cm.
Click here for Specifications (pdf)
Material Properties
- Extremes of heat and cold resistance: minus - 73°C to plus + 260°C
- Chemical inertness: affected only by a few rare substances at very high temperatures
- High release from sticky materials 'non-stick'
- Easy cleaning (nothing bonds permanently)
- Low friction co-efficient: 0.04 - 0.10; depending on load and surface speed
- Chemical corrosion and moisture resistance
- Mildew and fungus resistance
- Outstanding electrical, insulative and di-electric properties
- Ultra-violet, infra-red, microwave, radio frequency resistance
- Non combustible - self extinguishing
- Low thermal expansion: < 5%
- Food approval (USFDA)
- Lightweight and energy efficiency for economical operation
Other Information
Availability: Our fabrics are available from 3mm up to 4800mm wide. Please contact us to confirm the maximum available width for each of the above products.
Fabric Care: Do not fold or crease the fabric when handling and installing. The fabric can eventually discolour in sunlight, but is otherwise unaffected by biological or chemical agents, heat or cold within its temperature range, or by most areas of the electro-magnetic spectrum.
Other formats: Also available chemically etched one side for proprietary adhesive bonding. Standard etch is silica based, Sodium based etch is available upon request.
PTFE begins to soften at 260°C, increasing wear rate. Somewhat above 300°C, fumes are given off and these should not be inhaled. COSHH data available upon request. After contact wash handles thoroughly before handling or smoking tobacco.
